OSMO Polyx® Oil Rapid

Share
OSMO Polyx® Oil Rapid
Osmo hardwax oils offer a top quality treatment for wooden flooring, other internal and external woodwork. These are natural wood finishes with all the goodness of nature, made from natural oils and waxes, canauba wax, sunflower oil, candilla wax, thistle oil and more.

Osmo hardwax oils provide natural character, durability and protection for all interior and exterior timber. Wooden floors are often exposed to great stresses and strains, therefore they require extra protection and Osmo hardwax oils offer a very durable finish. This protection should not disturb or change the natural appearance of the wood‘s surface.

The range of Osmo hardwax oils provide this protection from within the wood itself, bringing the natural grain and character of the wood to life whilst offering maximum protection and allowing it to “breathe”. This helps to maintain its elastic surface qualities and allows it to compliment its environment. With Osmo natural wood finishes the wood surface retains its natural character and charm but also becomes abrasion, water and dirt resistant – a long lasting surface protection against those small daily mishaps.

POLYX® Hardwax-Oil Rapid High Solid Interior wood finish – clear, fast drying, Two coats within one day!

Product description:
Osmo POLYX® Hardwax-Oil Rapid is a professional, clear, fast drying, satin-matt (3232) floor finish for all wooden floors (solid wood floors, laminated flooring, oriented strand-board etc.).
Can also be used on cork floors and for terracotta and other unglazed tiles.
It is also well suited for the treatment of furniture surfaces (i. e. table tops).

The Osmo POLYX® Hardwax-Oil Rapid surface is extremely tough and hard-wearing. It is water-repellent and dirt-resistant. The finish is resistant against wine, beer, cola, coffee, tea, fruit juices, milk and water etc. when dry according to DIN 68861 - 1C (German Industrial Norm).

Dirt can easily be removed without trace. Renovating, even partially, is easy. Just clean and re-treat worn areas: No sanding, no repair marks, no removal of previous HARDWAX-OIL finish.

Osmo POLYX® Hardwax-Oil Rapid is based on natural vegetable oils and waxes. It is micro-porous and does not crack, flake, peel or blister. Therefore it is an ideal treatment even in rooms with high humidity.

Osmo POLYX® Hardwax-Oil Rapid is very easy to apply: Only two thin coats no primer!). The short drying time allows both coats within one day. It is of a creamy consistence (thixotropic). The satin-matt sheen can be intensified by slight polishing. Grain and texture of the wood are accentuated. A wooden floor which has been treated with Osmo HARDWAX-OIL will become more beautiful and valuable with age.

Product based on natural oil and wax Osmo POLYX® Hardwax-Oil Rapid is based on natural vegetable oils and waxes. Natural oils and waxes penetrate deeply into the wood, keeping it elastic and healthy, and preventing it from getting dry and brittle. The wood is allowed to breathe. Moisture can evaporate. Shrinking and swelling are reduced.

Recommended use:
Ideal for all wooden floors, solid or plank wood, strip parquet, OSB or cork flooring. Highly recommended for wooden furniture. Also for slate and screed as well as terracotta and other natural (non-glazed) ceramic tiles.
For dark hardwood floors like Jatoba, Meranti, Wengé, Merbau, etc. use Osmo WOOD WAX FINISH No. 1101 Clear Extra Thin (Trial application recommended).

Osmo POLYX® Hardwax-Oil Rapid can also be used to advantage on wooden furniture, table tops etc.

Colour tone:
3232 Clear Satin
3262 Clear Matt

Can sizes:
0.75L, 2.5L & 10L or
750ml, 2.5 Litres & 10 Litres

Coverage:
1 L = approx. 12 m², two coats
1 L = approx. 20 m², one coat

Storage:
Shelf life is 5 years or more if can is tightly closed. Store in a dry place. If thickened by frost it will regain a normal consistency under normal temperatures within 24-36 hours.

Product information: Polyx®-Oil Rapid High Solid
3232 satin-matt and 3262 matt clear interior wood finish

Preparation:
Wood surface must be clean and dry (moisture content max. 20%). Polyx-Oil is ready to use, please do no thin, stir well before use.
Clean or slightly sand old microporous finishes, remove old varnish (Osmo Paint Remover or by sanding). Small cracks, larger dents and small holes in the wood can be filled Osmo Woodfiller. Sand carefully before application starting with a coarse paper – final sanding for flooring P100-150, furniture P180-240. Remove dust etc. thoroughly from the surface before application (vacuum cleaner).

Application:
Apply first coat thinly, thoroughly and evenly along wood grain within 10-15 min. Remove surplus. Leave to dry 4-5 hours, ensuring good ventilation. Apply second coat as above. Remove surplus and leave to dry over night. Ventilate well. A further treatment of the floor is not necessary. When thoroughly dry, the surface can be polished with hand polisher or polishing machine. If a more satin finish is desired, apply Osmo LIQUID WAX CLEANER (also available as Spray) thinly and polish after
drying (for small areas use Osmo POLISHING PAD). When using a commercial brushing machine please follow instructions of manufacturer.

Cork floors
Due to the extreme absorption power of this highly elastic natural material we recommend the following procedure:
Apply first coat very thinly with a broad varnish scraper (the HARDWAX-OIL will immediately be absorbed by the cork surface). Leave to dry for a least 6-8 hours (if possible longer) – ensure good ventilation. Apply second coat very thinly with a roller of foamed plastics. Remove with cloth immediately any excess of finish (edges). Leave to dry for at least 12 hours. Small areas of cork flooring can also be treated by brush (Osmo HAND BRUSH). Please make sure to apply very thinly. Cork tiles are best treated before laying in order to avoid overlapping treatment of edges which would lead to prolonged drying times. A cork floor treated POLYX®Hardwax-Oil Rapid will get a robust, elastic and wear-resistant surface which will harden further over 1-2 weeks

Cleaning of tools:
Clean working utensils with Osmo Brush Cleaner (benzene-free).

Drying time:
At least 4-5 hours - provide good ventilation (Osmo wood finishes dry by oxidation and therefore need air). Dust dry - after approx. 2 hours. For cork surfaces the drying time can be 12 hours or longer.

Features of Osmo hardwax oils
Product quality

• Low percentage of solvents (High Solid/Full Solid)
• Easy to apply with a paintbrush, floor brush or microfibre roller (scraper for professionals)
• Primer and final coat from just one tin
• Very good coverage (low price per square metre)

Surface quality
•Surfaces have a natural appearance and feel
•The natural grain of the wood is enhanced
•The coating is completely safe when dry in accordance with EN 71.3
•(suitable for use on children’s toys) and DIN 53160 (fast to perspiration and saliva)
•Completely odourless when dry
•Extremely resistant to damp and dirt in accordance with DIN 68861-1C
•(resistant to red wine, coffee, fizzy drinks etc.)
•Does not crack, flake peel or blister
•Easy to care for and maintain using specially designed Osmo floor care products
•Partial renovation possible without needing to sand the entire floor area
Telephone Orders: 01773828111
From
£21.72 ex VAT
3232 Clear Satin 0.75 Litres
£21.72 ex VAT
3232 Clear Satin 10 Litres
£250.56 ex VAT
3232 Clear Satin 2.5 Litres
£65.94 ex VAT
3262 Clear Matt 0.75 Litres
£21.72 ex VAT
3262 Clear Matt 10 Litres
£250.56 ex VAT
3262 Clear Matt 2.5 Litres
£65.94 ex VAT

Related Products/Accessories

Similar Products

Recently Viewed Items [clear]