WET LOOK POLISH is a blend of styrene/acrylic polymer, wax and metal crosslinking additives in a water based emulsion form.
WET LOOK POLISH a durable and scuff resistant polish which dries to a “wet” look and protects and prolongs the life of flooring materials. Has a low maintenance requirement.
WET LOOK POLISH can be used on linoleum, PVC, rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors.
N.B. Not suitable for Unsealed wood or Cork floors.
It is essential that the floor is clean and free from grease, dirt and any previous dressings. Strip any old polish from the surface, it is recommended a polish stripper such as FLOORTECH HIGH ACTIVE POLISH STRIPPER followed with a neutralising product like FLOORTECH NEUTRAL FLOORCLEAN are used, then rinse thoroughly with clean water and allowed to dry out. Shake well before use and apply a thin even film of the polish using a lint free applicator and allow to dry before applying a second coat (approximately 30 minutes). WET LOOK POLISH may be buffed as required to enhance gloss finish.
Approximately 50 – 60 sqm per Litre.
2 years if left unopened. Stored in a cool, dry place & protected from frost.
2.5% Discount on 10 Litre Packs
5% Discount on 20 Litre Packs
For further Quantity Discounts please call 01773 828111 or Email for a quotation.
Telephone Orders: 01773828111